x
<a href="tel:+49 (0) 60 22 65 58 10">Phone:+49 (0) 60 22 65 58 10</a>
<a href="javascript:linkTo_UnCryptMailto('kygjrm8gldmYfy+am,cs');">Email: info<span class="at_blue">&nbsp;</span>ha-co.eu</a>
HA-CO Unternehmen
  • Kugelumlaufführung HAA0116RC HA-CO Recirculating Ball Bearing Guide

Linear guide 0116RC

Recirculating ball bearing guide HAA0116RC

Aluminium profile with stainless steel or plastic balls

Heavy duty linear guidance up to 360kg

Optional products such as end stops, dampers etc.

Accuride

Linear guide for heavy loads, with recirculating ball bearings

3D Data
The required data is not available. Please contact us.

Recirculating ball bearing guide DA0116RC

The linear guide 0116RC is available in lengths of 2. 4m and 3. 6m and can be assembled and extended without limit. This model is particularly suitable for high loads up to 360kg and is particularly resistant to corrosion thanks to the use of aluminium.

Features:

  • Linear motion guide and recirculating ball carriage
  • Load rating up to 360kg
  • Aluminium track, lengths 2.4m and 3.6m
  • Customer cuts track to required length and drills mounting holes
  • Carriages sold separately: stainless steel balls, polymer balls (quiet movement)
  • End stops sold separately
  • Corrosion resistant
  • Optional damper with recycling bracket
  • Optional door mounting kit

 

Mounting options and load ratings:

  • Distribute weight evenly across carriage(s)
  • Bracket 011-BRKT01RC (see data sheet) must be used to protect plastic components if end stops are subject to impact
  • We recommend that additional external stopping arrangements are used for high impact applications
  • Due to the extensive variety of applications and possible orientations, we recommend that customers test this product to their specific requirements

 

Rails of HA-CO are available individually and deliverable ex stock.  From 105,90 Euro per unit. Please request us!

Notes:

  • Fixing recommendation: M6 countersunk screw
  • Fix track as recommended on a rigid and flat surface
  • Tracks can be butted together for longer lengths if aligned accurately
  • Care must be taken while sliding the carriage into the track
  • Material: track and carriage extruded aluminium 6000 series
  • Lubrication: Castrol Spheerol Grease to NLGI 2 or similar. Apply through holes in carriage/bracket using a conical grease nozzle. We recommend re-greasing intervals sufficient to retain a grease film on the track; the track should not be allowed to dry out
  • Recycling bracket required to re-set damper (not required if used with door mounting kit)
  • Please refer to 2D CAD drawings for dimensional tolerances

 

The damper mechanism HAP0116-ECRC and the mounting kit HAS0116-BRKTRC for sliding doors are optionally available to match this HAA0116 rail (see data sheet).

 

Features and Notes | Damper Mechanism HAP0116-ECRC:

  • Springs and dampens the last 40mm of movement
  • Used with special bracket or door mounting kit
  • Replaces end stops
  • Fixing recoomendation: M6 screw
  • The special angle is required to reset the damper (not required when used with door mounting kit).
  • Please refer to 2D CAD drawings for dimensional tolerances

 

Features and Notes | Sliding Door HAS0116-BRKTRC

  • Mounting kit for top hung sliding doors
  • Maximum door weight 360kg
  • For door thicknesses up to 58mm
  • Corrosion resistant: suitable for exterior use with suitable protection
  • Wall/side mounted
  • Free running: typically 20N to move 180kg door
  • Aluminium fascia and end caps with anodised finish
  • Customer cuts track, beam and fascia to required length
  • Fixing recommendation: M6 countersunk screw
  • Fro wall/side mounting only
  • Distribute weight evenly across carriages. Use at least 2 carriages per door for stability
  • Customer supplies floor guide
  • If damper(s) are used, an additional buffer (supplied by customer) should be used to protect the bottom of the door/frame. If dampers are not used, protection buffers will be needed at the top and bottom of door/frame
  • Material: aluminium 6000 series
  • Lubrication: Castrol Spheerol Grease to NLGI 2 or similar. Apply through holes in carriage/bracket using a conical grease nozzle. We recommend re-greasing intervals sufficient to retain a grease film on the track; the track should not be allowed to dry out
  • Please refer to 2D CAD drawings for dimensional tolerances

 

If you have any questions, our HA-CO team will be happy to advise you - Please contact us!